PEASWAY PW-936 series gas alarm are widely used on the market, it can be powered by either AC110, AC220, or DC12,DC 24V.It can detect LNG and LPG gas respectively. The state-of-the art microprocessor design of PW-936 ensures a continuous and precise monitoring of flammable gas.

Products features:

1. Japanese FIGARO semiconductor sensor head used for accurate flammable gas detection;

2. Microprocessor for circuit control and gas monitoring to assure performance stability and reliability;

3 .SMD circuit board design with FR4 double sides PCB — satisfactory quality and reliability guaranteed;

4. Test button verifies alarm operation any time;

5. Audible and visible warnings;

6. Silence /Test Button with 3 LED indicators;

7. Low battery warning;

8. Fault signal warning;

9. Easy installation and maintenance;

10. No battery is required for circuit control;

11. Loud alarm signal exceeding 85dB(A) at 3m;

12. Easy installation and maintenance;

13. Complying with UL1484 and EN 50194 Standards;

14. Attractive case design;

Products specifications:

Power supply:       24VDC

Standby Current    55mA

Alarm Current:       85mA

Temperature: 0°C to 50°C

Humidity:       0 to 95%RH, non-condensing or icing

Alarm Sound Level:      exceed 85 dB(A) at a 3 m

Sensitivity:     Per UL 1484 or EN50194

Propane gas: 5%-15% of the lower explosion limit; Natural gas: 3%-20% of the lower explosion limit

Dimensions:   110 x 64 x 45mm

Relay output optional;

Material: ABS;

5 Year quality limited warranty.

Ningbo Hi-Tech Park Peasway Electronic Technology Co., Ltd. is one leading professional manufacturer of fire and security alarm products, including smoke detector, co detector, gas detector, heat detector, water detector, etc. more information, please contact with us now.

smoke alarm, co alarm, gas alarm, heat alarm, water alarm, water leak detector, PW-507S smoke detector, PW-507H heat detector, PW-507SH smoke and heat detector, PW-916 carbon monoxide detector, PW-918 carbon monoxide alarm, PW-936 gas leak detector, PW-312 water detector, EN14604 smoke alarm, UL smoke detector, NF smoke alarm, optical smoke alarm, 9V battery operated smoke detector, 9V smoke alarm,EN50291 co alarm, 4.5V co alarm, 9V co detector, co sensor, UL2034 CO alarm, EN50194 gas alarm, EN50194 gas leak detector, gas leak detector, natural gas alarm, propane gas alarm, LPG gas alarm, gas leakage detector, AC110V gas alarm, MAINS POWERED gas leak detector, fixed temperature heat alarm, rate of rise heat alarm, combustible gas detector，flammable gas detector，Manual call point, conventional system detectors, fire alarm control panel, sounders, beacons, horn, siren, strobe light with horn, strobe, flashing light，wireless detector, radio link smoke alarm, hardwired smoke alarm, conventional smoke detector, addressable smoke detector, addressable fire alarm systems,2 wire smoke alarm, 4 wire smoke alarm

PW-936天然气报警器，探测器主要用于监测空气中燃气浓度的含量，当空气中燃气浓度达到或超过预设的报警值时，PW-936家用天然气报警器，探测器就会发出声、光报警信号，提醒您迅即采取有效措施；同时可选择配备继电器启动联动装置，通风或关闭气源，排除险情；家用燃气报警器可有效避免火灾、爆炸、窒息、死亡等恶性事故的发生。

家用天然气报警器，探测器产品特点：
◆ 采用半导体高性能传感器，稳定性高、寿命长、抗中毒能力强
◆ 传感器模块化，易于更换、维护、标定
◆ 响应速度快，零漂小，精度高，功耗低
◆ 现场声、光报警

◆ 测试/静音按钮，配备3个LED指示灯

◆ 故障信号检测

◆ 多种报警信号输出，实现通风或关闭气源等联动装置

家用天然气报警器，探测器技术参数：
◆ 适合气体：□天然气   □液化石油气  □人工煤气
◆ 报 警 值：＜10%LEL 
◆ 温度范围：0℃～50℃（室内使用型）
◆ 湿度范围：＜95/%
◆ 工作电压：AC110/220V,50/60HZ
◆ 功    耗：4W

◆ 典型电流：25mA

◆ 报警声音强度：85分贝/3米

◆ 材料：ABS
◆ 使用寿命：5年
◆ 使用场所：室内
◆ 尺寸：12.3*7.1*4.7cm

◆ 符合标准：EN50194，UL1484