点击图片查看大图
图中所示量规塞处于检验状态。当柱塞处于静止状态时，W面应比X面缩进更深些。
|
Reference 尺寸符号 |
Dimension/尺寸（mm） |
Tolerance/公差（mm） |
|
d |
26.45 |
+0.03/-0.0 |
|
H |
14 |
±0.1 |
|
M |
13 |
±0.1 |
|
O |
23.0 |
±0.03 |
|
S |
8.5 |
+0.01/-0.0 |
|
V |
1.5 |
+0.02/-0.0 |
Purpose目的：
To check the dimensions S1 minimum and S1 maximum of E27 caps on finished lamps.
检验成品灯上E27灯头尺寸S1的最大值和最小值。
Testing 测试方法：
When the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surface “W” shall be co-planar with or project beyond surface “X” but it shall not project beyond surface “Y”.
当成品灯的灯头完全插入量规时，塞柱的W面应与X面共面或凸出X面，但不得凸出Y面。