ASTM D5664 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
ASTM D5664评定阻燃处理和高温对阻燃处理木材强度性能的影响的标准试验方法
The mechanical properties evaluated by this test method provide the following:
Data for use in developing modification factors for the allowable design properties of fire-retardant treated lumber when used at or near room temperatures (see 6.3).
Data for use in developing modification factors for allowable design properties of fire-retardant treated lumber when exposed to elevated temperatures and humidity (see 6.4).
Data (optional) for use in modifying these factors for size effects when fire-retardant treated lumber is used at or near room temperature and when exposed to elevated temperatures and humidity (see 6.5).
Data from the first two procedures in this test method of evaluation are indicative only for that species.
Note 1—The results of the three listed species (Southern pine, Douglas fir, and either white spruce or a Spruce/Fir mixture) may be used together to make inference on untested wood species because the three tested species represent the full spectrum of expected treatability.
Data from the optional third part of this three-part method of evaluation are indicative for all species because it is primarily used to assess size effects.
1. Scope
1.1 This test method covers procedures for obtaining data to assess the initial adjustments to allowable design stresses for lumber treated with candidate commercial fire-retardant (FR) formulations and further procedures for obtaining data to assess the effect of extended exposure to elevated temperature of 66 ± 2°C (150 ± 4°F).
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately)
ASTM Standards
D9 Terminology Relating to Wood and Wood-Based Products
D143 Test Methods for Small Clear Specimens of Timber
D1165 Nomenclature of Commercial Hardwoods and Softwoods
D3500 Test Methods for Structural Panels in Tension
D4761 Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
D5516 Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
D6841 Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
E84 Test Method for Surface Burning Characteristics of Building Materials
E176 Terminology of Fire Standards
D143 Test Methods for Small Clear Specimens of Timber
D1165 Nomenclature of Commercial Hardwoods and Softwoods
D3500 Test Methods for Structural Panels in Tension
D4761 Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
D5516 Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
D6841 Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
E84 Test Method for Surface Burning Characteristics of Building Materials
E176 Terminology of Fire Standards
Other Standards
U.S.ProductStandards American Softwood Lumber Standard
Index Terms
fire retardant; fire-retardant treated; lumber; mechanical properties; strength effects; temperature; thermal effects; treatment; Fire-retardant-treated wood/wood-base materials; Lumber; Mechanical properties; Strength--wood materials/applications; Temperature tests--building materials; Thermal analysis (TA)--building materials ; 
