NFPA 701 Standard Methods of Fire Tests for Flame Propagation of Textiles and Films
NFPA 701 阻燃织物与胶片的火灾试验方法
1.1.1 Test Method 1.
1.1.1.1 Test Method 1 shall apply to fabrics or other materials used in curtains, draperies, or other window treatments. Vinyl-coated fabric blackout linings shall be tested according to Test Method 2.
1.1.1.2 Test Method 1 shall apply to single-layer fabrics and to multilayer curtain and drapery assemblies in which the layers are fastened together by sewing or other means. Vinyl-coated fabric blackout linings shall be tested according to Test Method 2.
1.1.1.3 Test Method 1 shall apply to the following textile items
(1) Table skirts (2) Table linens (3) Display booth separators (4) Textile wall hangings
1.1.1.4 Test Method 1 shall not apply to specimens having an areal density greater than 700 g/m2 (21 oz/yd2).
1.1.1.5 For the purposes of Test Method 1, the terms curtains, draperies, or other types of window treatments, where used, shall include, but not be limited to, the following items
(1) Window curtains (2) Stage or theater curtains (3) Vertical folding shades (4) Roll-type window shades (5) Hospital privacy curtains (6) Window draperies (7) Fabric vertical shades or blinds (8) Horizontal folding shades (9) Swags (10) Fabric horizontal shades or blinds
1.1.2 Test Method 2.
1.1.2.1 Test Method 2 (flat specimen configuration) shall be used for fabrics, including multilayered fabrics, films, and plastic blinds, with or without reinforcement or backing, with areal densities greater than 700 g/m2 (21 oz/yd2).
1.1.2.2 Test Method 2 shall be used for testing vinyl-coated fabric blackout linings and lined draperies using a vinyl-coated fabric blackout lining.
1.1.2.3 Test Method 2 shall be used for testing plastic films, with or without reinforcement or backing, when used for decorative or other purposes inside a building or as temporary or permanent enclosures for buildings under construction.
1.1.2.4 Test Method 2 shall apply to fabrics used in the assembly of awnings, tents, tarps, and similar architectural fabric structures and banners.
1.1.3 Test Methods 1 and 2.
1.1.3.1 When durability to cleaning or weathering is claimed, the textile or material shall be tested for flame propagation as produced and after being subjected to the applicable cleaning or exposure procedures, in accordance with Chapter 16.
1.1.3.2 For materials that are to be applied to surfaces of buildings or backing materials that are to be used in buildings as interior finishes, the test textiles and films shall be tested and classified in accordance with NFPA 255, Standard Method of Test of Surface Burning Characteristics of Building Materials, or NFPA 265, Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile Coverings on Full Height Panels and Walls, whichever is required by the authority having jurisdiction.
Evaluate the extent of flame propagation with the criteria in the 2010 NFPA 701.
Use the 2010 NFPA 701 Standard Methods of Fire Tests for Flame Propagation of Textiles and Films to assess the propagation of flame of various textiles and films under specified fire test conditions.
The test methods included apply to textile materials used extensively in interior furnishing for public occupancy buildings including curtains, window shades, draperies, table linens, textile wall hangings, as well as to fabrics used in the assembly of awnings, tents, tarps and other similar architectural fabric structures and banners.
Specific information is provided on the types of test apparatus, calibration of equipment, geometry and conditioning of specimens, and testing and cleaning procedures. This up-to-date document is essential for testing laboratories and fabric/textile product manufacturers. (Softbound, 19 pp., 2010)
