ASTM D1039  Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation

ASTM D1039电绝缘用玻璃粘合云母标准试验方法

This characteristic is useful for specification purposes and has utility as a quality control parameter.

1. Scope

1.1 These test methods cover the evaluation of the characteristics of glass-bonded, natural, or synthetic mica materials intended for use as electrical insulation.

1.2 Glass bonded mica materials are commercially available in both injection molded and compression molded types. These test methods are applicable to both types except for tensile strength methods. (See Section 41.)
2. Referenced Documents (purchase separately)

ASTM Standards

C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C674 Test Methods for Flexural Properties of Ceramic Whiteware Materials
D116 Test Methods for Vitrified Ceramic Materials for Electrical Applications
D149 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D150 Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
D256 Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
D257 Test Methods for DC Resistance or Conductance of Insulating Materials
D374 Test Methods for Thickness of Solid Electrical Insulation
D495 Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
D618 Practice for Conditioning Plastics for Testing
D638 Test Method for Tensile Properties of Plastics
D648 Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D651 Test Method for Tensile Strength of Molded Electrical Insulating Materials
D695 Test Method for Compressive Properties of Rigid Plastics
D785 Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D1711 Terminology Relating to Electrical Insulation
D2149 Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Dielectrics At Frequencies To 10 MHz And Temperatures To 500C
D6054 Practice for Conditioning Electrical Insulating Materials for Testing
E228 Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
E289 Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
E1225 Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique

Index Terms

arc resistance; compressive strength; dielectric strength; dilatometry; dissipation factor; glass-bonded mica; heat distortion; impact resistance; interferometry; linear thermal expansion; mica; modulus of rupture; permittivity; porosity; resistivity; Rockwell hardness; specific gravity; synthetic mica; tensile strength; thermal conductivity; Ceramic electrical/electronic devices/applications; Glass electrical/electronic insulation; Heating tests--electrical insulating materials; Mica;