点击图片查看大图
FR-PE 6001 (阻燃聚乙烯)
Characteristic : 特 性 :
Low Density 低比重
Superior Melt Flow Index
High Notched Impact Strength, No Separating 高流动性，高缺口冲击强度，无析出
Application : 主要用途:
Pins of Christmas Tree 圣诞树松枝
Properties 特 性 Test Method
测试标准 Units
单位 Data
数据
Specific Gravity 密度 D-792 g/cm3 0.97
Mould Shrinkage 收缩率 D-955 % ---
Melt Index (230℃/2.16kgs) 熔融指数 D-1238 g/10min 60
Heat Deflection Temp (0.45Mpa) 热变形温度 D-648 ℃ 47
Tensile Strength, yield 拉伸屈服强度 D-638 Mpa 8
Break Elongation 断裂伸长率 D-638 % 186
Flexural Strength 弯曲强度 D-790 Mpa 6
Flexural Modulus 弯曲模量 D-790 Mpa 118
Izod Impact Strength, notched 缺口冲击强度 D-256 J/m 311
Flammability 阻燃性 UL94
(Equivalent) 1.5mm V2
3.0mm V2
Remark : The data are intended as a general guide only, makes no guarantee of results and assumes no obligation or liability.
以上数据为产品典型值，但不作为质保承诺。
Molding Recommendation 注塑工艺 :
Pre-dry Condition
干燥温度/时间 Injection Temperature
注塑温度 Injection Speed
注塑速度 Mold Temperature
模温
80℃(2hours) 155-175℃ 30-60% 40-70℃
Remark : The molding data is just for reference, the parameter should be changed under difference of mold design,
product shot volume, and the time of material residual.